Parts

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy

Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - These rings are threaded, use with 10mm chainring bolts - 48mm - 50mm chainline depending on the crankset

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. - Designed for M8 x .75 thread pitch - 10mm long - 4mm hex head - Bolt length is laser engraved onto the bolt head for easy length identification - 6-7 Nm installation torque with light grease on threads only

When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

This female-focused saddle has become one of our most popular models with its ergonomic shape, smooth curves and low-profile stitching. Its wide and rounded, fall-away profile make the Speed She an easy-to-ride, easy-to-maneuver women's saddle. - Steel rails - Microfiber Cover - Flex-Tuned Shell - DNAx Padding - Weight: 315g

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.

Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability. - 1/8" size, includes 98 links and 2 master pins - Colored chains are Teflon coated for low friction - Compatible with 8T driver and up - Links (links): 98 - Color: Pink - Width: 1/2 x 1/8" - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

The Shadow Conspiracy Ravager Pedals - Injection-molded composite with molded pins - Loose ball only - 4140 heat-treated spindle - 9/16"

Another great value in the Terry line, the Butterfly Cromoly Gel takes comfort up a level with the addition of a thin gel layer along the top of the saddle. For two decades, Terry has been designing and testing saddles with female athletes, distance riders, and recreational cyclists. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. A wonderful saddle for endurance/distance riders, the Butterfly Cromoly Gel is wider in the rear than typical race saddles for good support of a woman's sit bones; completely cut away through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with multi-density injection molded foam that's a bit stiffer in the rear for more power while pedaling; cromoly steel rails. - Smooth Dura-tek cover with printed accent - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 262mm x 155mm - Weight: 345 grams; 12.2 ounces - Rails: FeC alloy

The Falcon X is recommended for riders in search of fore/aft comfort and speed, and also has the distinction of being named an Editors' Choice by the testers at Bicycling. In addition to having a larger and longer cutaway than the Butterflies or FLX saddles, the Falcon has an inverted v-wing in the rear to provide a greater degree of flexibility and relief to the tailbone. Lightly padded overall with an elevated rear that gives riders a great perch for power climbs. Recommended for road and mountain biking. Hand made in Italy. - Black Dura-tek cover with seamless nose and screen-printed design - Terry's signature cutaway through the center of the saddle for pressure relief - V-wing relief channel at the rear - Length x width: 259mm x 152mm - Weight: 295 grams; 10.4 ounces - Rails: FeC alloy

When the trail turns downhill, you need control, comfort, and precision. You get all three from our new AM Lock-On Grips. Scientifically engineered with real-world rider pressure data, we looked at where your hands sit on the grip, what you're looking to do in terms of control when pushing your bike through corners, and what we can add to your experience. All-mountain riders tend to ride in a more relaxed position than XC riders, and the grip is tailored for this with an extended loading area across the top of the grip and special allowance made for your middle finger, which takes a lot of pressure. It combines multiple rubber densities, control chevrons, and an ergonomic profile to hit the absolute sweet spot of comfort and control. This version features a neat lock-on collar. - Designed for trail riders seeking a comfortable position with maximum control - Scientifically developed from extensive rider testing our ergonomics partner, Gebiomized - Extended loading area to support your palm - Different-density profiles and soft, Vexk3 lead to a ribbed finger area - Ribbed chevrons for ultimate control on the trails - Aluminum lock-on collar - Diameter: Small: 30mm; Medium: 33mm - Length: 138.5mm

Premium Super Thick bartape with a wet PU finish for extra grip even when wet. Understated embossing and matching finishing tape leaves a clean pro look, keeping your hands where you need them - on your bar. - Wet PU, Non-woven base, PU finish tape - Thicker for extra comfort - Plugs included

Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.

Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.

Bling collection delivers the flashiest bar tapes for the flashiest of riders. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. Silicone Gel dampens and eliminates all vibrations for the smoothest ride. Bling bling every time you ride around your city! - Eva Metallic (top layer): Fusion of metallic finish with the eva vibration dampening foam maximizes tackiness. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Silicone Gel: This backing provides additional comfort and vibration dampening. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Plush Hand Feel - Silicone Gel Injected 1 Set includes: - 2 Super Bling silicone gel tape rolls - 2 aluminum laser-etched Star Plugz (powder coated or anodized) - 2 High-end rubberized finish tapes

Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)

The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Oil Slick Star Plugz are the perfect touch for the perfect cockpit. - Oil Slick aluminum bar plugs - 3mm screw & expand - Laser-etched - Patented lock tight crown design (plugs never fall out)

Our best-selling Super Sticky Kush tuned and tailored to the specific needs of gravel. Plush 3.2mm of thickness for extra shock absorption and control. Each roll is extra long to give you the freedom to wrap any way you want. - Tackiest/Best Hand Feel - Long Lasting PU Tape - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape - Material: PU Length: 2200mm Width: 30mm Thickness: 3.2mm

• Replacement for one-piece crank • Steel

- 7-speed SIS compatible Freewheel